How To Choose The Best Industrial Fasteners For Your Job

Posted by on Nov 17, 2014 in Uncategorized | 0 comments

Most types of industrial production will involve fasteners of some sort, but these need to be chosen carefully. Any piece of equipment you manufacture or assemble will only be as strong as its weakest point, and this is typically where it’s fastened to another piece. Using the wrong fasteners can allow a piece to disassemble or break down over time. Consider a few points on how to choose the best industrial fastener for your job. 1. Consider if a part will be upgraded or modified down the road When some type of production will be modified or upgraded down the road, you need to use fasteners that will allow it to be disassembled. Permanent welding is not good in these cases as this will require metal cutting to separate two pieces. Rivets can be a better choice as these can be undone with the application of a heat source. For smaller pieces, liquid compounds can also be cut with the application of heat. 2. Note extremes in temperature Liquids and caulk are good for inexpensive fixes but they are not able to withstand extreme cold or heat. Cold will cause these to crack and heat can cause them to melt. A more permanent solution such as rivets or welds are better for anything that will be exposed to extremes in temperature, so always invest in these types of fasteners no matter the cost of production. 3. Note if there will be thermal expansion Additionally, remember that some materials expand under heat and when this is the case, liquids and caulks may not hold very well as they will actually be pushed away from the materials being held. Rivets and screws are a better option as these cannot typically be forced out of their connection by expansion. 4. Consider vibrations and stress A product that undergoes extremes in vibration may not fare well with rivets, screws and nails since the vibrations can cause these to come undone. Liquids and caulks are typically considered much better options as these will not separate and can seep into small cracks and openings of wood and other porous materials for a much better hold under extreme vibrations. Stress should also be considered as this can crack smaller fasteners, whereas liquids and caulks are usually more able to hold under extreme stress. Remember these four basics when it comes to industrial fasteners so you can make the best choice for your production or manufacturing applications. For more information, contact a company like Davro Assembly...

Read More

Three Surprising Advantages Of Tilt-Up Construction

Posted by on Nov 14, 2014 in Uncategorized | 0 comments

Tilt-up construction is quickly becoming a popular choice for new buildings in many areas; it refers to walls of a building being constructed flat on the ground and then tilted up by the use of cranes so they can be put in place and secured. This is done rather than the walls being built vertically, level by level. This type of construction can be used for virtually any building but is most popular for offices and showrooms or warehouses. Consider some surprising advantages of this type of construction so you can determine if it’s the right choice for your new building or facility. 1. It’s safer for workers overall and cheaper Most of the construction work for tilt-up construction is done on the ground rather than on scaffolding, so it’s safer for workers overall. There is less risk of falling, of having materials fall and of other height-related injuries when you use tilt-up construction. For construction companies, this is a consideration since it can mean lower insurance costs for them but for those looking to have a new facility constructed, it can also mean cost savings. A construction company that has lower insurance premiums may be able to charge less for their work, and the company contracting the work to be done may not need to take out additional insurance bonds or forms of coverage themselves. 2. Projects and phases can overlap When walls are constructed on the ground, projects and phases of construction can overlap. This offers two benefits, one being that the project can be completed in much less time than if each phase needed to be done separately. Another benefit is that this allows for better communication between each team of contractors in case there are problems with each phase. For example, if electrical wiring should run too close to plumbing fixtures this can be addressed immediately rather than the problem being discovered after electricians are off the job site. This, too, allows the project to be completed more quickly and easily. 3. Tilt-up panels can be created in any look When walls are created on the ground rather than erected level by level, they can be made to resemble any type of finished look. Textures, adornments and even curved walls can be created more easily than if designers needed to be on scaffoldings to create these looks. No matter the preferences of the owner, the tilt-up walls can be designed to accommodate. Consider these three advantages of tilt-up construction and note if it may be the best choice for your new building. For more information, contact a company such as Allcon (NSW) Pty...

Read More

3 Common Reasons for Wooden Stump Damage

Posted by on Nov 13, 2014 in Uncategorized | 0 comments

Several homeowners know quite well that living in a house with a fragile foundation is a ticking time bomb. Nonetheless, some with wooden stumps opt to disregard some clear signs that their houses need restumping. If your doors or windows seem to ‘stick’ when you’re opening and closing them, or the floors look rather uneven, it may be the right time for you to consider restumping your house. The following points identify three common causes of damage to your wooden stumps and suggest how you can curb each one of them. Insect Infestation Wooden stumps are often highly vulnerable to insect attacks. Despite their small size, wood-eating insects such as termites and wood ants can gradually but certainly compromise the structural integrity of your house, nibbling through its foundation bite after bite. Furthermore, these insects can cause severe damage to your house’s foundation since they can attack timber stumps located deep into the ground. Since spraying your timber stumps with chemicals repellants can only deter those insects on their unburied parts, it can be more effective to remove and replace the decayed stumps of timber altogether. Dampness                                                 In order to last, your house’s wooden stumps need to stay dry. Therefore, persistent rainwater can cause immense structural damage to your wooden stumps since the soil on which they are built may remain wet for a long duration. In turn, the damp grounds will expose your wooden stumps to increased moisture levels, and thus, lead to them to decompose. To minimise the likelihood of water damaging your wooden stumps, you should clean your gutters regularly, conduct repairs on cracked caulking, and replace damaged roof shingles. Soil Movement As your house exerts its weight on the ground below, it can cause soil movement as it self-adjusts to settle. After some time elapses, you may start to observe cracked exterior walls, uneven floors, or squeaking doors. These signs may indicate that the soil below the foundation of your house is undergoing a natural process of change. Although you can do little to avoid the settling of your house, directing rainwater downspouts reasonably far away from the wooden stumps can significantly reduce the possibility soil being washed away. If your house is erected on timber stumps, you’ll need to strengthen its foundation at some point because of the inevitable damaging effects of insect attacks, dampness, and soil movement among other natural factors. While it can be somewhat costly, you should use a professional such as Budget Reblocking to restump the wooden stumps of your...

Read More

4 Reasons You Should Grow Kikuyu Grass on Your Property

Posted by on Nov 11, 2014 in Uncategorized | 0 comments

Looking for a grass to cover your land, but want to avoid the hassle which most modern species come with? Why not try kikuyu? Kikuyu has been very popular in Australia for many years, for a variety of reasons. The originally African species can be seen growing in many gardens and fields all around Australia. So, why is it so popular? And why should you seriously consider growing it on your property? It’s Cheap Kikuyu seeds are very inexpensive, especially when compared to that of other grass species. Most DIY stores sell large bags, which you can use to grow the grass over large areas for a very low price. Instead, if you’d prefer to save a bit more money, a few well-placed kikuyu runners can fill an empty space very quickly. If you’d rather get the growing over and done with, kikuyu is also relatively cheap to buy by the square foot. It’s Fast-Spreading If you want kikuyu grass to replace another species, such as santa anna grass, or just to fill an empty area, it can do so quickly and without assistance, in most cases. This is mainly due to kikuyu’s ability to spread up to 4 square feet per month without competition, and its variety of spreading techniques. Because of this, some see kikuyu as very invasive, so be sure to border you garden beds heavily. It’s Low-Maintenance and Hardy Requiring very little water and often no fertilizer, kikuyu is certainly one of the hardier grasses. Though, when conditions are great, it may need more mowing than other species of grass. Kikuyu is also highly drought resistant, hence its popularity in Australia. Not only will it do well in direct sunlight, but it is also partially frost resistant. In addition, kikuyu will often remain disease-free and healthy. It’s Good-Looking Kikuyu usually remains relatively green, not only during summer, but also during winter, unlike the vast majority of warm-season grasses. The species may not be soft on the skin, but it will appear thick and lush, once established. On top of this, kikuyu will help prevent erosion more effectively than the vast majority of other grasses. Lastly, kikuyu produces significantly less pollen and other allergens than other grass species, making it great for families who experience hay-fever and other pollen allergies. You can learn more about the process of planting the grass, the cost, and other maintenance tips through landscaping companies such as Brook...

Read More

Reasons To Hire Professional Office Cleaners

Posted by on Nov 10, 2014 in Uncategorized | 0 comments

Whether you run a small business with just a couple of employees or you have a large office with many employees, it is important that you have it cleaned regularly. While you can do the cleaning yourself or appoint one of your employees to do it, a better option is to hire professional office cleaning services. There are several reasons why you should hire a professional office cleaning service. Appearances If your business is open to the public, appearances are everything. If your office or business isn’t as clean as it could be, people are going to notice. When they see that cleaning isn’t up to standards, they will start to think twice about doing business with you. After all, if it looks like you don’t care about a clean business, they may assume that you don’t care about your business in general. No Overtime Or Additional Employees When you choose to have one of your employees do the cleaning, you are likely going to have to pay overtime so they can do the cleaning on top of their regular work. If you hire an additional employee for cleaning, you are going to have that salary to pay. When you hire professional office cleaning services, you will only be paying for the work that they do. You don’t have to pay overtime or keep additional employees on staff. No Supplies Necessary You will not need to spend money on cleaning supplies, floor polishers and other equipment that is necessary to keep an office or business clean. All of these things are supplied by the cleaning service. Plus, they often have better equipment and cleaning solutions than you would buy, so they are going to do a much better job. Less Employee Downtime When an office isn’t properly cleaned, it can lead to illness spreading from person to person, causing employee downtime. For instance, carpets that aren’t vacuumed and steam cleaned regularly have dirt, allergens, and other debris trapped in the fibres. When people walk across the carpets, these things are released into the air, get breathed in and can lead to health problems. As you probably know all too well, when one person in an office gets sick, everyone else is likely to get sick, and many will take time off until they are feeling better. Professional cleaning services will keep the carpets, and everything else, clean and free of allergens and other dirt so your employees feel great and you don’t have to pay for sick time. For more information, contact a company such as Riteway Cleaning...

Read More
Page 2 of 3123